Power Tools
Brand: AIRCRAFT
MPN: AT0015-29
AirCraft Ratchet Yoke for Air Ratchet Wrench 3/8" (AT0015-29) for Model AT0015
At a Glance: OEM-fit ratchet yoke that helps locate and support the head mechanism for dependable, smooth ratcheting.
The AirCraft AT0015-29 ratchet yoke is a key head component for the AT0015 3/8" air ratchet wrench, designed to support and guide parts of the ratcheting assembly for consistent engagement. When a ratchet starts slipping, feels rough, or develops uneven movement in the head, the yoke can be one of th..
N$ 146.63
Ex VAT:N$ 127.50
Brand: AIRCRAFT
MPN: AT0015-10
AirCraft Rear Bearing for Air Ratchet Wrench 3/8" (AT0015-10) for Model AT0015
At a Glance: Genuine rear bearing spare part for the AirCraft AT0015 3/8" air ratchet wrench—supports smooth motor rotation and consistent performance.
The AirCraft AT0015-10 rear bearing is a key support component in the AT0015 air ratchet’s motor/drive assembly, helping the rotating parts run true and smoothly under load. When bearings wear, you’ll often notice a rough feel, extra vibration, increased noise, or a ..
N$ 49.68
Ex VAT:N$ 43.20
Brand: AIRCRAFT
MPN: AT0017-20
AirCraft Rear Plate for Air Die Grinder 6mm Mini (AT0017-20)
At a Glance: Replacement rear plate for the AirCraft AT0017 6mm Mini Air Die Grinder—supports internal motor assembly alignment and stability.
The AirCraft AT0017-20 Rear Plate is a key internal structural component in the AT0017 6mm Mini Air Die Grinder. Inside a pneumatic die grinder, the motor assembly relies on properly machined plates to keep the rotor and related parts aligned, supported, and running smoothly at speed..
N$ 40.71
Ex VAT:N$ 35.40
Brand: AIRCRAFT
MPN: AT0016-11
AirCraft AT0016-11 Rear Plate For Air Ratchet Wrench
At a Glance: Replacement rear/end plate that supports motor alignment and airflow routing inside the AirCraft AT0016 Air Ratchet Wrench.
Think of the rear plate as one of the “precision anchors” inside your air ratchet’s motor section—keeping components aligned and helping airflow do its job properly. The AirCraft AT0016-11 Rear Plate is a replacement end plate for the AirCraft Air Ratchet Wrench (AT0016 series). If an original plate i..
N$ 85.33
Ex VAT:N$ 74.20
Brand: AIRCRAFT
MPN: AT0015-11
AirCraft Rear Plate for Air Ratchet Wrench 3/8" (AT0015-11) for Model AT0015
At a Glance: Genuine rear plate spare part for the AirCraft AT0015 3/8" air ratchet wrench—supports internal alignment and stable motor/drive assembly fitment.
The AirCraft AT0015-11 rear plate is a key internal support component in the AT0015 3/8" air ratchet wrench, helping locate and stabilise parts of the motor/drive assembly. In pneumatic tools, plates and supports do the essential alignment work—keeping bearings..
N$ 85.33
Ex VAT:N$ 74.20
Brand: AIRCRAFT
MPN: AT0015-38
AirCraft Retainer Ring for Air Ratchet Wrench 3/8" (AT0015-38) for Model AT0015
At a Glance: OEM-fit retainer ring (snap ring/circlip) used to secure components in the AirCraft AT0015 3/8" air ratchet wrench and maintain correct assembly position.
The AirCraft AT0015-38 retainer ring is a small but essential fastening component used inside the AT0015 3/8" air ratchet wrench. This snap ring (also known as a circlip) locks into a groove to удерж components in place and prevent unwanted axial mov..
N$ 8.97
Ex VAT:N$ 7.80
Brand: AIRCRAFT
MPN: AT0015-30
AirCraft Reverse Button for Air Ratchet Wrench 3/8" (AT0015-30) for Model AT0015
At a Glance: OEM-fit reverse selector button for fast forward/reverse changes on the AT0015 3/8" air ratchet.
The AirCraft AT0015-30 reverse button is the direction selector used on the AT0015 3/8" air ratchet wrench, giving you quick control to switch between tightening and loosening without breaking your workflow. If the selector feels sloppy, sticks, or won’t hold position, it can make the tool frustrating—and ..
N$ 34.27
Ex VAT:N$ 29.80
Brand: AIRCRAFT
MPN: AT0026-10
AirCraft Rotor Blade (x5) For Air Palm Sander AT0026 (AT0026-10)
At a Glance: Pack of 5 replacement rotor blades (vanes) to restore power and smooth running on the AirCraft AT0026 air palm sander.
Your air palm sander’s motor relies on rotor blades (also called vanes) to convert compressed air into consistent torque. Over time, blades wear down, lose their seal inside the rotor, and the tool starts to feel weak, uneven or slow to spin up. The AirCraft AT0026-10 Rotor Blade Set (x5) is a di..
N$ 14.38
Ex VAT:N$ 12.50
Brand: AIRCRAFT
MPN: AT0016-14
AirCraft AT0016-14 Rotor Blade For Air Ratchet Wrench
At a Glance: Replacement rotor blade (vane) for the AirCraft AT0016 air ratchet—helps the motor seal correctly for stronger, smoother performance.
Rotor blades—also called vanes—are the parts that make a pneumatic motor “bite” into the air and turn it into rotation. The AirCraft AT0016-14 Rotor Blade is a replacement vane for the AirCraft Air Ratchet Wrench (AT0016 series). As vanes wear, chip, swell from moisture, or lose their crisp..
N$ 11.62
Ex VAT:N$ 10.10
Brand: AIRCRAFT
MPN: AT0015-12
AirCraft Rotor Blades 4 Piece for Air Ratchet Wrench 3/8" (AT0015-12) for Model AT0015
At a Glance: 4-piece rotor blade (vane) set for the AirCraft AT0015 3/8" air ratchet wrench—key service parts for restoring air motor performance.
The AirCraft AT0015-12 rotor blades (4 piece set) are the heart-of-the-air-motor parts that help your AT0015 3/8" air ratchet make power. Inside the pneumatic motor, these vanes slide in the rotor and create the sealing action that converts compressed air into rot..
N$ 29.21
Ex VAT:N$ 25.40
Brand: AIRCRAFT
MPN: AT0017-24
AirCraft Rotor for Air Die Grinder 6mm Mini (AT0017-24)
At a Glance: Replacement rotor for the AirCraft AT0017 6mm Mini Air Die Grinder—core motor component that drives rotation and performance.
The AirCraft AT0017-24 Rotor is the heart of the pneumatic motor inside your AT0017 6mm Mini Air Die Grinder. This is the spinning core that works with the rotor blades/vanes and internal plates to convert compressed air into high-speed rotation—exactly what you need for deburring, grinding, ..
N$ 98.44
Ex VAT:N$ 85.60